Hiring Glass Repair Experts; Tips for Business Owners

Six DIY Steps of Repairing Windows

Glass windows are easy to repair without necessarily having to repair the entire window. There are several signs that indicate a window pane requires replacement and they include; discoloring, cracking, blemishes and availability of moisture in between the glass panes. Glass window pane repair is something you can easily do yourself. This article gives you steps on how to do replace a broken window pane with the following supplies at your disposal:

  • protective gloves
  • safety goggles
  • putty knife
  • utility knife
  • paint
  • window glaze
  • window nails

Step 1: Gather protective clothing and supplies

Gather the supplies you need to get the job done.  It is very important to keep safe while working with broken window panes. This requires protective clothing and eyewear which include goggles, protective gloves, long sleeved shirt, closed shoes, and pants. Protective eyewear protects your eyes from a piece of glass in case there is shuttering.

Step 2: Remove glass from the window

This step calls for utmost precaution. Be sure not to take chances and put on gloves. Care should be taken so that you do not cut your arms or drop the glass on the ground. A shattered pane is quite easy to remove as you only need to take out the pieces one by one. If the glass happens to just have a crack, you will be required to take out the entire pane.

Step 3: Remove old putty

By use of a putty knife or utility knife, take your time to remove all the old putty from the window frame. Removal ease of putty varies from frame to frame. Be careful not to remove too much of it at once as that could damage the wood. Care should also be taken while removing putty so that the paint around it is not damaged. All putty should be removed leaving no bumps on the window pane.

Step 4: measure window opening and order glass

After removal and preparation of a pane, take measurements of the opening so that you are aware of exactly what type of glass to order for.

Step 5: Dry fit and place glass

Dry fit your ordered piece of glass just to be sure fitting will be proper. With assurance, put putty all around the window pane and then place the glass.

Step 6: Replace nail fasteners and finish

Replace the old nails with new ones to hold the window in place. Care should be taken while bending the fasteners as too much pressure could cause the new piece of glass to break. Add another layer of putty all around the window pane and finally, do the finishing by painting the putty.

For assistance, talk to a window repair professional.

Read More

The 4 Steps of Making a Custom Glass Splashback

The best splashbacks (panels that shield walls from splashes of water or other liquids) are bespoke splashbacks. This is because they are fabricated to fit the exact dimensions of your home. This article discusses the different stages of making the custom glass splashback of your kitchen at home.

Step 1: Selecting Specifications

In this stage, your role is to clarify what exactly you want. For instance, you have to decide how much of the wall will be covered by the splashback. Some people may wish to have the entire wall covered. Others may want only the part around the cooker or oven to be covered. You also need to pick the type or finish of glass that you want. Examples include frosted glass and printed glass. Your preferred custom splashback maker may send a salesperson to your home so that you provide the details of the specifications that you want.

Step 2: Taking Measurements

This step may be combined with step one above. Taking measurements involves creating a template outlining the dimensions to be covered by the splashback. The template includes details of such items like the size and location of power outlets or switches. This is a very crucial stage because it determines how well the splashback made will fit in your kitchen. You should be present when measurements are being taken so that the person sent over can get your opinion if the need arises. Many suppliers give you a quote once the measurements have been taken. This is because they now have an accurate idea of what it will take to install what you want.

Step 3: Fabrication

The splashback maker will now use the feedback from step two to make your custom splashback. He or she will use as few pieces of glass as possible in order to limit the number of joints in the finished product. This allows the installed splashback to have a smooth finish.

Step 4: Installation

This is the final step of the process. The cut glass is transported to your home. An installer glues the pieces onto the wall using the strongest adhesive available. The bespoke splashback will fit in your kitchen perfectly.

Experienced custom splashback suppliers rarely run into any setbacks during the installation process. This is because they carefully cut the glass based on the precise measurements that were taken. You should install custom glass splashbacks in your kitchen so that the finished product is a flawless work of art. Keep in touch with your glass splashback supplier so that you get advance notice of each step of the manufacturing process.

Read More

3 Helpful Tips for Applying Fresh Putty on Your Glass Windows

Glaziers use putty (a paste made from different materials such as linseed oil and chalk) to hold glass panes in place. Over time, pieces of putty can become detached from the window frame. This puts the glass in your windows at the risk of falling out and breaking. You can prevent the high glass repair costs of such damage by applying a fresh layer of putty on those windows. This article discusses some helpful tips that you can use as you conduct this preventive maintenance task.

Use a Heat Gun

Many people reach for a propane torch and use it to heat the old putty that they would like to remove and replace. This is a big mistake for several reasons. First, the intense heat from the propane torch can cause the window frame to burst into flames. This is especially true for wooden frames that have been losing moisture for all the years that the window has been in place. The other reason why it is not advisable to use a propane torch is that the intense heat will cause the putty to start giving off smoke. It is much better to use a heat gun. Buy one from a hardware store near you. The heat gun will generate less heat than the propane torch. That heat will be sufficient to soften the putty so that you can remove it with ease.

Do Not Have a Hammer Close to You

Many DIY putty application projects go awry when the person succumbs to the temptation to get hold of a hammer and a chisel to force the old putty out. Do not include a hammer on the list of items that you will use during this project. Use a flat putty knife to pry the old putty gently out. If you meet with limited success, apply more heat from the heat gun. This cautious approach will protect your window glass from being damaged by the force of a hammer.

Avoid Latex Based Putty

This type of putty is very popular for DIY projects because it dries quickly. However, it hardly forms a smooth surface that you can paint easily. Thus, you run the risk of cracking the window glass as you paint the new putty.

Use the tips above to apply a new coat of putty so that you keep costly glass repairs at bay. You can also work alongside a glass repair professional so that you learn the best way to perform the task. This will enable you to perform subsequent repairs on your own.

Read More

Glaziers | 3 Actions To Prevent Broken Windows From Boosting Energy Bills Upwards

The obvious security breach of broken windows is most noteworthy, making your home susceptible to break-ins. But most homeowners tend to ignore the other threat that comes from broken windows –– higher energy bills. While windows and energy bills seem unconnected, they are more correlated than you can imagine.

Heat gain through un-shaded windows in summer can rise by nearly 87 percent, while windows in winter can allow up to 40 percent of the home’s heat to escape. This causes a great deal of stress on your cooling and heating units, and they end up consuming more electricity. Heating and cooling costs already account for 40 percent of an average home’s energy. Broken windows will yield even more startling statistics, as heaters and air conditioners work harder to maintain comfortable temperatures. To combat these problems, you’ll need to hire glaziers in your area to fix your broken windows using these solutions.

Replace Broken Window With Double Glazed Glass:

Double-glazing will help to retain heat outside or inside, depending on the season. Apart from its heat protection properties, it also reduces outside noises in your home. Double-glazing works equally well for hot conditions as it does for cold climates. This is because it retains cool air conditioning in your home. Double-glazed glass is an ideal choice for reducing energy bills because each pane traps air between them to serve as insulation protection in the home. If your windows are broken, getting a glazier in your area to install double-glazed glass is not only prudent from a safety perspective, but it will also reduce your energy consumption because it prevents inside air from escaping and outside air from entering your home.

Choose High Performance Windows

You’ll naturally want to choose high performance windows to reduce your energy bills. The Window Energy Rating Scheme (WERS) issues a star rating for window performances. Windows with more stars are better energy savers. Ask your glazier to install glass with higher stars when replacing your broken windows.

Protect Your New Glass With Window Tint Films

While double-glazing is an excellent way to trap air, it will not prevent sunlight from entering and heating your home. Installing window films on double-glazed glass will reduce the amount of heat gain through windows. These window tint films are perfect for the blazing hot Australian sun because they reduce the amount of glare and sunlight that comes through open windows –– maintaining a comfortable temperature throughout. Installing tint films is an easy DIY job, but you can also ask the glazier to install it for you once he has replaced your broken window glass.

Follow these actions when hiring glaziers in your area to replace your broken glass, and reduce your energy bills.

Read More

Say Goodbye To Soap Scum On Glass Showers!

A stylish glass shower cubicle undoubtedly gives a bathroom a modern, fresh appeal.  Glass shower screens look great when they are sparkling clean, but soap scum can quickly build up, leaving your shower glass looking cloudy and grubby.  Here’s how to return your shower cubicle glass to gleaming glory in just a few simple steps, using a few household items that you’ll probably already have in your kitchen cupboards. 

This method avoids the use of chemicals and bleaches that could damage the grouting and plastic sealant in your shower cubicle and doesn’t entail hours of scrubbing to get great results.

What you’ll need

  • laundry washing powder
  • cold water
  • a soft, clean cloth
  • Squeegee cloth (available from all good DIY and hardware stores)
  • rubber gloves
  • white vinegar
  • spray bottle
  • clean cotton cloths

How to do it

  1. Begin by mixing a cup of laundry washing powder with enough cold water to form a thick paste.  
  2. Put your rubber gloves on to protect your hands, and apply the washing powder paste to the shower cubicle glass using a soft, clean cloth.  Use a circular motion to rub the paste well into the most stubborn areas of soap scum staining, paying particular attention to the bottom of the cubicle screens where soap is inclined to accumulate.  
  3. Allow the detergent paste to penetrate the soap scum for a few minutes, and then wipe the shower glass over again, making sure that you’ve covered all the staining.  
  4. Thoroughly rinse the glass using warm water until all traces of detergent are gone.  The easiest way to do this is by using the shower head.  
  5. Now take the Squeegee and use it to remove any excess water droplets that are on the glass.  This great piece of kit will leave the glass dry and virtually smudge-free.  
  6. Make up an equal parts solution of white vinegar and cold water, and decant it into the spray bottle.  Spray the cubicle glass with the water and vinegar solution one panel at a time, and then wipe the glass down using a clean cotton cloth.  
  7. Finish off the job by polishing up the glass to a sparkling shine using the remaining clean cotton cloth.

In conclusion

You can quickly and simply get rid of soap scum from your shower glass by following the above guide.  It’s a good idea to include this procedure in your weekly cleaning routine so that soap scum isn’t allowed to build up and spoil the look of your shower.

Read More

How to Remove Hard Water Spots Without Damaging Your Windows

Many people complain that the cleaning chemicals they use to remove stubborn hard water spots from windows often cause the glass to develop scratches. This article discusses a simple method that you can use to clean off those spots without causing any damage to your window glass.

Step 1: Prepare a Vinegar-Water Mixture

Mix one cup of water with one cup of vinegar. Reduce or increase this quantity based on how many windows you have to clean. If it is a tiny spot on one window, prepare a limited volume of this mixture (100ml of each liquid, for example).

Step 2: Wipe the Spots

Get a soft towel and dip it into the vinegar-water mixture. Wipe this wet towel over the hard water spots on your window glass. Ensure that the towel remains wet with that fluid as you wipe the blemishes on the glass.

Step 3: Cover the Hard Water Spots

Use the wet towel to cover the water spots on the window. This will allow the vinegar-water mixture to react with the minerals that dried on the glass, thereby loosening them. The other option you can take is to drape that wet towel over the window, and then leave it for several minutes. Just make sure that the towel remains in contact with the glass.

Step 4: Buff the Window

Buff the hard water spot off the glass until there is no mark visible on the glass. Repeat the steps above in case there are some stubborn hard water marks that remain after this first treatment.

Step 5: Inspect the Glass

The minerals that caused the spots on the glass can penetrate the porous glass and cause it to corrode or develop some cracks. This is most likely to happen if the hard water spots have been there for an extended period. Call an emergency glass repair professional to repair any damage that you cannot repair on your own using DIY glass repair kits.

Follow the steps above to remove any hard water spots promptly before they cause additional damage to your window glass. Ask the emergency glass repair expert to suggest additional ways that you can use to keep hard water spots at bay. For instance, he or she may recommend that you use window protectors to form a barrier that will stop mineral deposits contained in the water that flows from your roof from collecting on the window glass when it rains.

Read More

How to Keep Your Aluminum Window Frames Sparkling Clean

The powder coating on aluminum door and window frames can deteriorate if grime and dirt are allowed to build up on those frames. That deterioration can cause the beautiful sheen of the frames to lose its luster. This article discusses how you can clean those frames so that dirt does not accumulate on them.

Step 1: Dust the Window Frames

Use a damp washcloth for this task. Alternatively, you can use a feather duster. The purpose of dusting the aluminum window frames is to remove the surface dirt that is easy to dislodge. This will allow you to concentrate your subsequent efforts on the entrenched dirt. Use broad strokes of the dusting implement to clear the frame of all dust or loose debris.

Step 2: Prepare the Cleaning Solution

You will need two spray bottles. In one bottle, mix ammonia and water. You can use quarter cup of ammonia in a full cup of water. Close the bottle and shake it until the solution is mixed properly. Fill the second spray bottle with warm water.

Step 3: Apply the Cleaning Solution

Spray the ammonia solution onto the window frames you have just dusted off. Let the solution sit for a few minutes before you use the damp washcloth to wipe off any dirt that will have been loosened by the ammonia solution.

Step 4: Repeat the Ammonia Solution Treatment

Re-apply the ammonia solution if there are still some visible signs that some dirt is still embedded in the aluminum window frames. Use the damp washcloth to clean the freed dirt.

Step 5: Rinse the Frames

Take the second spray bottle that has warm water and spray this water on the areas that you have just cleaned. Take a dry washcloth and dry off the places that you have just rinsed. Make sure that the washcloth you use is non-abrasive. An abrasive washcloth will damage the powder coating on the window frame.

Perform this maintenance task as often as you can, or at least twice a year. This will prevent the damaging effects of grime from affecting your window frames. You should also clean your aluminum window frames at a time when they will have the best chance to dry quickly, such as in the morning (on a sunny day). That “simple” care that you give those frames on a regular basis will keep them sparkling throughout their useful life, and you will enjoy their attractive appearance for years.

For more information on aluminum window frames, contact a professional window service, such as Platinum Glass and Aluminium.

Read More
Page 1 of 212